Collagen & Peptide NutritionNutrition and collagen guides

Nutrition guide

Bubble Slam Dunk Hydrating Moisturizer Versus Bliss Bright Idea Vitamin C + Tri-Peptide Collagen Protecting & Brightening Moisturizer

Bubble Slam Dunk Hydrating Moisturizer Versus Bliss Bright Idea Vitamin C + Tri-Peptide Collagen Protecting & Brightening Moisturizer This barrier-repair moisturizer is formulated around Aloe Barbadensis Leaf Juice Powder and Persea Gratissima Oil to strengthe

Bubble Slam Dunk Hydrating Moisturizer Versus Bliss Bright Idea Vitamin C + Tri-Peptide Collagen Protecting & Brightening Moisturizer

This barrier-repair moisturizer is formulated around Aloe Barbadensis Leaf Juice Powder and Persea Gratissima Oil to strengthen the skin barrier and hydrate skin.

This brightening moisturizer is formulated around 3-O-Ethyl Ascorbic Acid and Palmitoyl Tripeptide-5 to brighten dull-looking skin and soften the look of wrinkles.

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Water

Isononyl Isononanoate

Glycerin

Heptyl Undecylenate

Glyceryl Stearate Citrate

Caprylic/Capric Triglyceride

Polyglyceryl-3 Stearate

Cetyl Alcohol

Aloe Barbadensis Leaf Juice Powder

Acrylates/C10-30 Alkyl Acrylate Crosspolymer

Persea Gratissima Oil

Butyrospermum Parkii Butter

Glucose

Hydrolyzed Pea Protein

Sodium Chloride

Sodium Succinate

Oenothera Biennis Oil

Hoya Lacunosa Flower Extract

Anthemis Nobilis Flower Extract

Hydrogenated Lecithin

Arginine

Tocopheryl Acetate

Tocopherol

Sodium Phytate

Phenoxyethanol

Water, Isononyl Isononanoate, Glycerin, Heptyl Undecylenate, Glyceryl Stearate Citrate, Caprylic/Capric Triglyceride, Polyglyceryl-3 Stearate, Cetyl Alcohol, Aloe Barbadensis Leaf Juice Powder, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Persea Gratissima Oil, Butyrospermum Parkii Butter, Glucose, Hydrolyzed Pea Protein, Sodium Chloride, Sodium Succinate, Oenothera Biennis Oil, Hoya Lacunosa Flower Extract, Anthemis Nobilis Flower Extract, Hydrogenated Lecithin, Arginine, Tocopheryl Acetate, Tocopherol, Sodium Phytate, Phenoxyethanol

Propanediol

Cetearyl Alcohol

3-O-Ethyl Ascorbic Acid

Coco-Caprylate/Caprate

Hydrogenated Farnesene

Glyceryl Stearate

Limnanthes Alba Seed Oil

Palmitoyl Tripeptide-5

Glycyrrhiza Glabra Root Extract

Saccharide Isomerate

Ceramide Ng

Niacinamide

Mangifera Indica Fruit Extract

Euterpe Oleracea Fruit Extract

Camellia Sinensis Leaf Extract

Pseudozyma Epicola/Camellia Japonica Seed Oil Ferment Extract Filtrate

Aloe Barbadensis Leaf Juice

Glycine Soja Oil

Simmondsia Chinensis Seed Oil

Argania Spinosa Kernel Oil

Xanthan Gum

Acacia Senegal Gum

Hydroxyacetophenone

Cetearyl Olivate

Caprylyl Glycol

Polyacrylate Crosspolymer-6

Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer

Polyglyceryl-4 Laurate/Succinate

PEG-100 Stearate

Sorbitan Olivate

Cetearyl Glucoside

Hexylene Glycol

Ethoxydiglycol

Sodium Citrate

Tetrasodium Glutamate Diacetate

Sodium Metabisulfite

Ethylhexylglycerin

Potassium Sorbate

Sodium Benzoate

Citric Acid

Parfum

Limonene

Water, Glycerin, Caprylic/Capric Triglyceride, Propanediol, Cetearyl Alcohol, 3-O-Ethyl Ascorbic Acid, Coco-Caprylate/Caprate, Hydrogenated Farnesene, Glyceryl Stearate, Butyrospermum Parkii Butter, Limnanthes Alba Seed Oil, Palmitoyl Tripeptide-5, Glycyrrhiza Glabra Root Extract, Saccharide Isomerate, Ceramide Ng, Tocopherol, Niacinamide, Mangifera Indica Fruit Extract, Euterpe Oleracea Fruit Extract, Camellia Sinensis Leaf Extract, Pseudozyma Epicola/Camellia Japonica Seed Oil Ferment Extract Filtrate, Aloe Barbadensis Leaf Juice, Persea Gratissima Oil, Glycine Soja Oil, Simmondsia Chinensis Seed Oil, Argania Spinosa Kernel Oil, Xanthan Gum, Acacia Senegal Gum, Hydroxyacetophenone, Cetearyl Olivate, Caprylyl Glycol, Polyacrylate Crosspolymer-6, Hydroxyethyl Acrylate/Sodium Acryloyldimethyl Taurate Copolymer, Polyglyceryl-4 Laurate/Succinate, PEG-100 Stearate, Sorbitan Olivate, Cetearyl Glucoside, Hexylene Glycol, Ethoxydiglycol, Sodium Citrate, Tetrasodium Glutamate Diacetate, Sodium Metabisulfite, Phenoxyethanol, Ethylhexylglycerin, Potassium Sorbate, Sodium Benzoate, Citric Acid, Parfum, Limonene

Reviews

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

This ingredient is also known as shea butter. It is a plant-derived extract from the nuts of the Africa shea tree and one of the most well-studied emollients.

Because it has a high concentration of fatty acids (primarily oleic, stearic, and linoleic) it is able to form a protective barrier on the skin's surface. This helps seal in moisture and prevents transepidermal water loss (TEWL).

In vitro research found an increase in skin hydration by 58% and a decrease in TEWL by 37.8% after 24 hours of applying this ingredient (pretty impressive for a single ingredient!).

Besides hydration, shea butter also contains triterpenes that have anti-inflammatory potential. In particule, lupeol cinnamate has shown the highest anti-inflammatory activity in vivo.

Shea butter also contains vitamins A and E which may contribute to antioxidant activity.

While Shea Butter has an SPF rating of about 3-4, it is not a sunscreen replacement.

This ingredient may not be fungal acne safe because its fatty acids fall within the C11-C24 range that the Malassezia yeast can metabolize.

Caprylic/Capric Triglyceride (aka MCT Oil) is a lightweight emollient, solvent, and texture enhancer. It is considered a skin-softener by helping to prevent moisture loss.

Though it behaves like an oil, it is not technically one due to its chemical composition. One perk of this ingredient is that it is very stable, resistant to oxidation, and unlikely to go rancid.

In practice, that translates to a long shelf life and a consistently elegant skin feel.

While there is an assumption Caprylic Triglyceride can clog pores due to it being derived from coconut oil, there is no research supporting this. Just patch test if you have concerns.

Fractionated coconut oil and MCT Oil are both listed as Caprylic/Capric Triglyceride according to INCI. This is because INCI names are based on the ingredient’s final chemical composition and not its marketing name or source.

This ingredient is treated as the gold standard fungal acne safe oil. Even though it is coconut derived, the problematic lauric acid is stripped out.

This leaves just caprylic (C8) and capric (C10) acid. These chain lengths actually trend antifungal; a 2020 study found caprylic acid was enough to disrupt Malassezia furfur cell membrane, with a caprylic acid derivative damaging membrane structures at concentrations as low as 0.2%.

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

This ingredient is also known as Avocado oil. It's the cold-pressed oil from the flesh of the avocado fruit packed with fatty acids (mostly oleic acid).

The rich fatty acid profile allows it to function as a skin conditioning agent and emollient; it helps soften and smooth skin while reducing water loss.

Preclinical research has found that topical avocado oil increased collagen synthesis and reduced inflammation during wound healing, giving it some skin-repairing credibility.

The unsaponifiable fraction of the oil is also interesting: studies on avocado unsaponifiables showed that it helped skin produce more collagen and other structural compounds that support healing.

The CIR Expert Panel has found this ingredient to be non-irritating in formulations.

It's a great ingredient for dry or compromised skin. Just know it may not be fungal acne safe. This is because the oleic acid content falls within the range that Malassezia can use as a food source.

Phenoxyethanol is one of the most widely used preservatives in skincare (and for good reason!).

It has a large spectrum of antimicrobial activity and especially effective bacteria, yeast, and mold while only having a weak effect on your skin's natural microbiome.

On a cellular level, it disrupts the cell membranes of microbes by poking holes that make the cell leak. This shuts down the chemical reactions the microbe needs to make energy so it can no longer survive.

Another perk of this ingredient is that it stays functional across a wide pH range (3-10).

You'll often see it paired with boosters like Ethylhexylglycerin; one study showed that a 1:9 ratio of Ethylhexylglycerin to Phenoxyethanol damages bacterial membranes as effectively as doubling the Phenoxyethanol concentration on its own.

Typical use concentrations range from 0.3-1% depending on the formula, and this ingredient is capped at 1% int the EU.

Safety-wise, the fear mongering does not hold up to the evidence. The EU's Scientific Committee on Consumer Safety and FDA consider it safe as a preservative at up to 1%, including for children of all ages.

Adverse systemic effects only showed up in animal studies at exposures roughly 200x higher than what people get from cosmetics. And despite its very widespread use, this ingredient is a rare sensitizer and allergic reactions are uncommon.

Tocopherol is a fat-soluble antioxidant known as Vitamin E.

You'll find this ingredient in the vast majority of skincare (for good reason). It works to neutralize free radicals, or unstable molecules generated by UV exposure, pollution, and other environmental stressors, before they can cause oxidative damage to your skin cells.

Topically applied tocopherol has been shown to protect against UV damage by ramping up the skin's own natural defense enzymes.

It also acts as a skin conditioning agent; some studies show that regular topical use can improve the skin's water-binding capacity over 2-4 weeks.

This ingredient is especially loved for being a team player. When combined with Vitamin C, the photoprotective effect of both ingredients roughly doubles and the combo also helps reduce UV-induced DNA damage.

This ingredient has some brightening potential but it's more of a prevention ingredient than spot-fader. Cell studies show it can slow down melanin production but it's worth noting that it's not the most powerful brightener out there.

In formulations, it also serves as a stabilizer that helps protect other oxidation-prone ingredients from degrading.

Concentrations usually range from 0.1-1% in most leave-on products.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Similar Comparisons

SUPPLEMENTAL FIELD FILE

Notes to carry forward.

Source-derived references linked through this guide’s public topic markers.

02
SOURCE SHELF

Research notes & excerpts

RESEARCH

Handling and Reconstitution in a Research Context

In a laboratory research setting — the only setting for which this material is nominally sold — handling and reconstitution matter both for validity and for a specific chemical reason unique to copper peptides. Glow is supplied lyophilized (freeze-dried). Lyophilized peptide is comparatively stable: copper-peptide powder is generally reported stable for many months refrigerated and longer frozen, whereas once reconstituted the working solution is far more perishable.12 Vendors and reconstitution guides typically describe dissolving the powder in bacteriostatic water (which contains ~0.9% benzyl alcohol as a preservative), giving a refrigerated working stability on the order of roughly 3–4 weeks, versus only 24–48 hours if plain sterile water without preservative is used.12 The copper-specific wrinkle is pH and container chemistry. GHK-Cu is reported to be most stable in a mildly acidic window (approximately pH 5.5–6.5); above roughly pH 7, copper dissociation from the peptide accelerates, which matters because the copper is integral to the proposed mechanism. Standard soda-lime glass vials can leach sodium ions over time and raise solution pH, nudging the system toward copper release; and unlike the dry powder, reconstituted solution should not be frozen, because ice-crystal formation can physically damage the peptide.12 For a researcher, these facts translate into concrete controls: use preserved diluent for multi-use vials, refrigerate (do not freeze) the working solution, protect from prolonged light and heat, minimize the interval between reconstitution and use, and treat any color change or precipitate as a reason to discard. Reported research parameters, which appear on vendor and protocol pages, illustrate the arithmetic without endorsing any use. For a 70 mg Glow vial reconstituted with, say, 3 mL of bacteriostatic water, the total peptide concentration is roughly 23.3 mg/mL; applying the stated 5:1:1 ratio to a reported per-administration figure of about 2,330 mcg implies on the order of 1.67 mg GHK-Cu with about 0.33 mg each of BPC-157 and TB-500 per unit.1 These numbers are experimental parameters reported by suppliers, not validated doses, not clinically justified, and not human-use recommendations. They exist so that a researcher can compute concentrations for laboratory work, and they should be read as measurement bookkeeping rather than as evidence that any particular quantity produces any particular effect. Diluent Bacteriostatic water (benzyl alcohol preservative) Extends working stability to ~3–4 weeks vs 24–48 h Reconstituted storage Refrigerate 2–8°C; do not freeze Freezing damages peptide; heat/light degrade it pH sensitivity Most stable ~pH 5.5–6.5 Alkaline drift accelerates copper dissociation Lyophilized storage Months refrigerated; longer frozen Dry powder far more stable than solution Even meticulous handling, it should be stressed, only preserves the integrity of the material; it does nothing to establish that the material does what is claimed. A perfectly reconstituted, correctly stored, copper-intact solution of an unproven blend is still an unproven blend. Handling rigor is necessary for valid research and irrelevant to the efficacy question. For the fuller set of reported single-agent parameters, dosagepeptide.com’s GHK-Cu (100 mg vial) research protocol page catalogs the copper-peptide figures that the Glow blend inherits.

Source trail · dosagepeptide.com →
05
PROVISION SHELF

Products & side-by-side records