Dermalogica Pro-Collagen Banking Serum Versus DRMTLGY Vitamin C E + F

Dermalogica Pro-Collagen Banking Serum Versus DRMTLGY Vitamin C E + F

This anti-aging serum is formulated around Trehalose and Carnosine to soften the look of wrinkles and strengthen the skin barrier.

This anti-aging serum is formulated around Ascorbic Acid and Tocopherol to soften the look of wrinkles and brighten dull-looking skin.

What's inside

Key Ingredients

Benefits

Concerns

Ingredients Side-by-side

Water

Pentylene Glycol

Coco-Caprylate/Caprate

Glycerin

Propanediol

Simmondsia Chinensis Seed Oil

Trehalose

Oryza Sativa Bran Water

Butylene Glycol

Ethoxydiglycol

Triheptanoin

Arginine PCA

Diglycerin

Dipotassium Glycyrrhizate

Sodium Hyaluronate

Collagen Amino Acids

Glycine Soja Oil

Helianthus Annuus Seed Oil

Citrus Aurantium Dulcis Peel Oil

Citrus Aurantium Bergamia Fruit Oil

Citrus Paradisi Peel Oil

Rosmarinus Officinalis Leaf Extract

Cupressus Sempervirens Leaf/Nut/Stem Oil

Santalum Album Oil

Citrus Limon Peel Oil

Rosa Damascena Flower Oil

Jasminum Sambac Flower Extract

Hydrolyzed Jojoba Esters

Oryza Sativa Bran Extract

Aloe Barbadensis Leaf Extract

Tephrosia Purpurea Seed Extract

Helianthus Annuus Extract

Juniperus Virginiana Oil

Tagetes Minuta Flower Oil

Rosmarinus Officinalis Leaf Oil

Cistus Ladaniferus Leaf/Stem Extract

Hydrolyzed Rice Protein

Tocopheryl Acetate

Tocopherol

Phospholipids

Carnosine

Glyceryl Stearate Citrate

Caprylyl Glycol

Polyglutamic Acid

Glycolipids

Glycine Soja Sterols

Acrylates/C10-30 Alkyl Acrylate Crosspolymer

Glyceryl Caprylate

Sclerotium Gum

Polyquaternium-80

Didecyldimonium Chloride

Dianthus Caryophyllus Flower Extract

Xanthan Gum

Methylpropanediol

Cetearyl Alcohol

PEG-40 Hydrogenated Castor Oil

Ammonium Acryloyldimethyltaurate/Beheneth-25 Methacrylate Crosspolymer

Phytic Acid

Polysorbate 20

Tetrasodium Glutamate Diacetate

Citric Acid

Sodium Hydroxide

Sodium Polyacryloyldimethyl Taurate

Sodium Benzoate

Potassium Sorbate

Limonene

Linalool

Water, Pentylene Glycol, Coco-Caprylate/Caprate, Glycerin, Propanediol, Simmondsia Chinensis Seed Oil, Trehalose, Oryza Sativa Bran Water, Butylene Glycol, Ethoxydiglycol, Triheptanoin, Arginine PCA, Diglycerin, Dipotassium Glycyrrhizate, Sodium Hyaluronate, Collagen Amino Acids, Glycine Soja Oil, Helianthus Annuus Seed Oil, Citrus Aurantium Dulcis Peel Oil, Citrus Aurantium Bergamia Fruit Oil, Citrus Paradisi Peel Oil, Rosmarinus Officinalis Leaf Extract, Cupressus Sempervirens Leaf/Nut/Stem Oil, Santalum Album Oil, Citrus Limon Peel Oil, Rosa Damascena Flower Oil, Jasminum Sambac Flower Extract, Hydrolyzed Jojoba Esters, Oryza Sativa Bran Extract, Aloe Barbadensis Leaf Extract, Tephrosia Purpurea Seed Extract, Helianthus Annuus Extract, Juniperus Virginiana Oil, Tagetes Minuta Flower Oil, Rosmarinus Officinalis Leaf Oil, Cistus Ladaniferus Leaf/Stem Extract, Hydrolyzed Rice Protein, Tocopheryl Acetate, Tocopherol, Phospholipids, Carnosine, Glyceryl Stearate Citrate, Caprylyl Glycol, Polyglutamic Acid, Glycolipids, Glycine Soja Sterols, Acrylates/C10-30 Alkyl Acrylate Crosspolymer, Glyceryl Caprylate, Sclerotium Gum, Polyquaternium-80, Didecyldimonium Chloride, Dianthus Caryophyllus Flower Extract, Xanthan Gum, Methylpropanediol, Cetearyl Alcohol, PEG-40 Hydrogenated Castor Oil, Ammonium Acryloyldimethyltaurate/Beheneth-25 Methacrylate Crosspolymer, Phytic Acid, Polysorbate 20, Tetrasodium Glutamate Diacetate, Citric Acid, Sodium Hydroxide, Sodium Polyacryloyldimethyl Taurate, Sodium Benzoate, Potassium Sorbate, Limonene, Linalool

Ascorbic Acid

PPG-26-Buteth-26

Ferulic Acid

Palmitoyl Tripeptide-1

Palmitoyl Tetrapeptide-7

Ceramide EOP

Ceramide NP

Palmitoyl Tripeptide-5

Ceramide AP

Phytosphingosine

Cholesterol

Sodium Lauroyl Lactylate

Carbomer

Sodium Metabisulfite

Acetyl Octapeptide-3

Phenoxyethanol

Triethanolamine

Panthenol

Water, Ascorbic Acid, Ethoxydiglycol, PEG-40 Hydrogenated Castor Oil, PPG-26-Buteth-26, Glycerin, Tocopherol, Ferulic Acid, Palmitoyl Tripeptide-1, Palmitoyl Tetrapeptide-7, Ceramide EOP, Ceramide NP, Palmitoyl Tripeptide-5, Ceramide AP, Phytosphingosine, Cholesterol, Sodium Lauroyl Lactylate, Butylene Glycol, Carbomer, Polysorbate 20, Xanthan Gum, Sodium Hyaluronate, Sodium Metabisulfite, Acetyl Octapeptide-3, Phenoxyethanol, Triethanolamine, Panthenol

Reviews

Be the first to review

Alternatives

Ingredients Explained

These ingredients are found in both products.

Ingredients higher up in an ingredient list are typically present in a larger amount.

Butylene Glycol (or BG) is used within cosmetic products for a few different reasons:

Overall, Butylene Glycol is a safe and well-rounded ingredient that works well with other ingredients.

Though this ingredient works well with most skin types, some people with sensitive skin may experience a reaction such as allergic rashes, closed comedones, or itchiness.

Ethoxydiglycol (aka Diethylene Glycol Monoethyl Ether) is one of the cosmetic world's quiet problem solvers.

In a formula, it is a solvent that dissolves tricky ingredients that don't want to mix in and helps spread ingredients evenly across your skin without leaving a greasy or sticky feeling

This makes it great for hard-to-dissolve actives like vitamin C, benzoyl peroxide, and self-tanner DHA.

It also has mild humectant and penetration enhancer abilities so it can help some actives absorb a little deeper.

The penetration boost is backed by lab research: studies using human skin samples found it improved how well an active dissolves into the upper layer of skin rather than tearing down your skin barrier. Reviews of its mechanism also describe it interacting gently with the lipids and water in your outermost layer of skin.

Just know this penetration-enhancing effect is not universal. It helps a lot in some formulas and did very little in others (so the benefit really depends on the specific product).

Safety-wise, the evidence is reassuring. The Cosmetic Ingredient Review Expert Panel reviewed it and concluded it's safe for use in cosmetics and recognized it as non-irritating, non-sensitizing, and non-comedogenic in skincare.

Typical leave-on skincare usage lands around 1-10%. The EU has sets caps of 2.6% in non-spray products, 10% in rinse-offs, 7% in oxidative hair dye, and 5% in non-oxidative hair dye.

Glycerin (or glycerol) is a compound naturally found in your skin. It's a powerhouse humectant that pulls water into the stratum corneum.

Topically, glycerin does several things at once:

Your skin makes glycerin on its own (mostly from sebaceous oil breakdown) and shuttles it to your outermost layer of skin, or your epidermis, via aquaporin-3.

Aquaporin-3 is a transporter that is essential for normal skin hydration, elasticity, and repair. Interestingly, mice lacking in AQP3 have dry and less elastic skin that can be fully corrected with glycerin.

This ingredient is non-irritating, plays well with almost every ingredient, and works across all skin types. Typical use is anywhere between 3-10% but can go up to 79% in some leave-on products.

Just know very high concentrations (>40%) can feel tacky in low humidity.

Glycerin is the name for this ingredient in American English. British English uses Glycerol/Glycerine.

PEG-40 Hydrogenated Castor Oil is an emulsifier derived from castor oil.

As an emulsifying agent, it helps other ingredients like fragrances and fat-soluble vitamins dissolve cohesively.

Due to its large molecule size, it doesn't penetrate beyond the skin's surface.

This ingredient has a solid regulatory track record; the CIR Expert Panel first concluded it was safe for use in cosmetics at concentrations up to 100% in 1997. A 2012 reassessment reaffirmed that finding. Safety studies have also found no irritation or evidence of toxicity.

A 2019 study did find this ingredient to grow Malassezia, so this ingredient may not be fungal acne safe.

Polysorbate 20 is a gentle, water-soluble emulsifier and mild surfactant. It stops oil and water from separating to keep your formulas blended and stable.

It also acts as a mild penetration enhancer by helping active ingredients absorb slightly better.

The common safety discussion around this ingredient involves a manufacturing byproduct called 1,4-dioxane.

Trace amounts can form during production but the EU's Scientific Committee on Consumer Safety has concluded that levels at/below 10 ppm in finished products are safe (commercial products consistently fall within acceptable margins).

True allergic reactions are uncommon and the CIR Expert Panel has confirmed this ingredient to be safe as used in cosmetics.

Because it is derived from lauric acid, it may not be fungal acne safe.

Sodium Hyaluronate is the salt form of hyaluronic acid. It is a long sugar chain that is naturally found in your skin, joints, and connective tissue that maintains hydration and elasticity.

In skincare, it works as a humectant. It pulls water from the environment and deeper layers of skin and binds it to the surface.

Interestingly, the size of the molecule affects its behavior:

Some clinical evidence links low molecular weight versions to improved wrinkle depth, elasticity, anti-inflammatory effects, and barrier repair.

Many serums use a blend of both weights so you can get surface hydration plus longer-lasting and deeper effects.

You'll typically see concentrations between 0.1-2% for this ingredient.

Tocopherol is a fat-soluble antioxidant known as Vitamin E.

You'll find this ingredient in the vast majority of skincare (for good reason). It works to neutralize free radicals, or unstable molecules generated by UV exposure, pollution, and other environmental stressors, before they can cause oxidative damage to your skin cells.

Topically applied tocopherol has been shown to protect against UV damage by ramping up the skin's own natural defense enzymes.

It also acts as a skin conditioning agent; some studies show that regular topical use can improve the skin's water-binding capacity over 2-4 weeks.

This ingredient is especially loved for being a team player. When combined with Vitamin C, the photoprotective effect of both ingredients roughly doubles and the combo also helps reduce UV-induced DNA damage.

This ingredient has some brightening potential but it's more of a prevention ingredient than spot-fader. Cell studies show it can slow down melanin production but it's worth noting that it's not the most powerful brightener out there.

In formulations, it also serves as a stabilizer that helps protect other oxidation-prone ingredients from degrading.

Concentrations usually range from 0.1-1% in most leave-on products.

Water. It's the most common cosmetic ingredient of all. You'll usually see it at the top of ingredient lists, meaning that it makes up the largest part of the product.

So why is it so popular? Water most often acts as a solvent - this means that it helps dissolve other ingredients into the formulation.

You'll also recognize water as that liquid we all need to stay alive. If you see this, drink a glass of water. Remember to stay hydrated!

Xanthan gum is used as a stabilizer and thickener within cosmetic products. It helps give products a sticky, thick feeling - preventing them from being too runny.

On the technical side of things, xanthan gum is a polysaccharide - a combination consisting of multiple sugar molecules bonded together.

Xanthan gum is a pretty common and great ingredient. It is a natural, non-toxic, non-irritating ingredient that is also commonly used in food products.

Similar Comparisons